济南汽车音响改装http://www.sdcarmusic.com/后，在车辆行驶过程中，在随着油门的由浅入深，出现电流声，电源走线于驾驶座下方通过，遇到这种情况应该首先确定电流声的位置，确定好电流声来源，然后根据以下情况进行处理。

1、济南汽车音响改装http://www.sdcarmusic.com/建议如果是喇叭发出的就重新搭建一条音频线再次进行试音。
Jinan car audio conversion proposal if it is to re-build the speaker issued an audio line audition again.

2、如果是分频器位置发出的电流声，建议把音频线外层和主机外壳连起来共同接地，再检查电流声是否消失。
If the current sound position divider issue, we recommend that the audio cable to link the outer shell and a host of common ground, and then check the current sound disappears.

3、如果经过以上两部骤依然出现电流声，那就要检查车内的其它电气设备是否产生干扰，建议对线材，信号线等进行外部的屏蔽加固。
After more than two arrest if the current sound is still there, it would have to check whether other electrical devices interfere with the car, it is recommended to wire and signal cables for external shielding reinforcement.